Roll-On

[ Up ] [ Roll-On Preparation ] [ Roll-On Application ] [ Roll-On Maintenance ] [ Super Base Preparation ] [ Super Base Application ] [ MSDS Forms ]

FOR A DURABLE, SLIP-FREE SURFACE, SKATING FLOORS MUST BE KEPT CLEAN. POOR MAINTENANCE COULD RESULT IN A SLIPPERY SKATING SURFACE.

For Best Results

1. Drag floor daily with an UNTREATED dry mop.

2. Clean floor as needed with an Automatic Floor Scrubber and Traction Skate Floor Cleaner.

For Good Results

1. Drag floor daily with an UNTREATED dry mop.

2. Clean floor as needed by soaking a large towel in a bucket of clear water. Wring out and wrap the towel around a 36" push broom. Push the towel across the Widths of the skating surface (NOT THE LENGTH). Upon reaching the other side, turn the towel over so that the clean side is face down to the surface and push it back to the other side. Overlap a little for cleaner surface. Soak and wring the towel again and repeat this process until the floor has been cleaned.

Storage

1.    Store indoors only.

2.    Keep from freezing.

3.    In cold weather, keep all containers at room temperature for 48 hours prior to application.

4.    After application, transfer excess Roll-On to new, one-gallon paint containers with lids.

5.    Approximate shelf life . . . . 12 months.

Roll-On is a trademark of Nazzaro Enterprises, Inc. All other products mentioned are registered trademarks or trademarks of their respective companies.

Questions or problems regarding this web site should be directed to sherry@roll-on.com.
Copyright © 1997 Nazzaro Enterprises, Inc. All rights reserved.
Last modified: Thursday October 05, 2000.